Lumiboost LED Driver

Lumiboost Square.jpg
_43C8577.jpg
Lumiboost side 3.jpg
Lumiboost inputs SML.jpg
_43C8566.jpg
RC in.jpg
A026_11161834_S004 copy.jpg
A026_11161835_S005 copy.jpg
Wifi Network.jpg
Analog PWM Wifi to Wireless DMX.jpg
DMX Wireless systrem copy.jpg
Pot.jpg
Lumiboost Defaults.jpg
Max power given input voltage.jpg
Lumiboost Technical Drawing.jpg
Lumiboost Square.jpg
_43C8577.jpg
Lumiboost side 3.jpg
Lumiboost inputs SML.jpg
_43C8566.jpg
RC in.jpg
A026_11161834_S004 copy.jpg
A026_11161835_S005 copy.jpg
Wifi Network.jpg
Analog PWM Wifi to Wireless DMX.jpg
DMX Wireless systrem copy.jpg
Pot.jpg
Lumiboost Defaults.jpg
Max power given input voltage.jpg
Lumiboost Technical Drawing.jpg

Lumiboost LED Driver

$69.90

Advanced high power DC LED Driver

Quantity:
Add To Cart

Lumiboost is an advanced DC to DC boost converter designed specifically for high power LED chip-on-board arrays. With a powerful microprocessor onboard, it can read multiple input signal types for dimming control. These include: DMX-521, R/C servo style PWM, analog voltage, Art-Net, and board-to-board communication. Designed with drone lighting in mind, the Lumiboost is optimized for Lithium batteries. It includes a programmable low voltage cutoff feature for battery protection. Thermal protection and active fan control can be enabled with the use of an external thermistor.

The Lumiboost is fully configurable via the PC application software. It also has a live telemetry stream for monitoring power, voltage, current, input signals, and more. Numerous Lumiboost boards can be daisy-chained together for simultaneous control and configuration.

Specifications:

  • Input Voltage: 12 to 32V via XT30 Connector (20-26V recommended)

  • Max Output Voltage: 72V

  • Max Output Power: 150W (up to 300W with theoretical infinite heat sinking)

  • Max Output Current: 5.5A - Constant Current

  • Flicker Free - DC Output

  • Protection Features: output over voltage, output over current, input under voltage, thermal fold-back

  • Fan Output: 10/12V selectable, PWM speed control - 3-pin JST GH Connector

  • Aux power: +5V output for R/C Receiver or DMX Receiver

  • Dimming Inputs: Digital I/O, 0-5V Analog Voltage, R/C PWM, DMX-512, Art-Net via ESP-01 WiFi

  • Weight: 30g

LED Compatibility:

The input voltage must be lower than the forward voltage (VF) rating of the LED emitter. For best results, use LEDs with a VF rating of 22 to 70V. When using LEDs with a VF above 36V, it’s recommended to keep the input voltage above 20V.

By default, the Lumiboost is configured for LEDs with a max current rating of 3.5A and a VF of 32V. Changing any settings will require use of the Lumiboost Configurator Software.

Whats included?

  • Lumiboost PCBA

  • Daisy-chaining wire

  • R/C PWM input wire

Lumiboost Manual

Lumiboost Software/Firmware